Product Details

Key point on quality: Material and finishing, The brass stamping part can be suitable for automatic assembling.

Specification: thickness in 1.0mm, 0.8mm Material in brass;

Raw material status:

For higher requirement on raw material, it can be inlayer.

Application:

Switch: the brass in right size and edge's finishing should be smoothly. For switch, mainly use 1 gang 1 way, 1 gang 2 way, 2 gang 1 way, 2 gang 2 way, 3 gang 1 way, 3gang 2 way.

Details of switch: 10A, 16A, 20A, 32A, 45A.

The key brass stamping part is different due to ampere requirement. Thickness difference, shaping design. For some market use, the brass material is just for fixed part only. Other parts should be in copper material.

For surface finishing, normal it is yellow color, some required part in plating silver. The thickenss of silver will be made as per drawing & market requirement or testing standard.

The hardness on material is middle level, For above photo item, the moving contact is key for complete product working. So the brass part size should be controlled within 0.02-0.01mm

For terminal connector, the above item in iron plated nickel material. If there is higher requirement, it can be brass material. Also we can change the complete terminal part in brass connector finishing from turning machine. It will help temperature rise a little.

Tooling for brass stamping part. We have own design and full automatic running. The speed is controlled 80pcs per minute. For some item less angle, the speed can be more

Quality Notes:

Size tolerance, shaping status

Top brand for switch: legrand, AVE, VIMAR.

http://www.switchsocketparts.com/